Login Area

Login

Forgot Password?Click Here.
New user?Create Account.

LATEST NEWS

 

Why not come and visit our busy workshop and talk to us about your requirements

 

Located in the Beautiful Cotswolds, you can find us at

Unit 7

Churchill Industrial Estate

Leckhampton

Cheltenham

Gloucestershire

GL53 7EG

 

or contact us by Phone :- 01242 300279

 

Heres a map / directions for your smart phone :-  http://tinyurl.com/koqzyr6

 

 

 

 

 

************LATEST NEWS************

 

We have a 08 plate T5 in for a full facelift, inside and out! Here's a pic of the work in progress. A few of the upgrades are sportline alloys, caravelle headlights, RNS510 Stereo, side bars, front splittler and lots more to follow.

Get in touch if you would like any upgrades to your early T5. We can make your van look like a T5.1

 

We have also had a Ford Transit in this week, we sound proofed it with Dynamat, fully insulated, downlighters on a dimmer and split charge system all ready for his next visit for a full conversion.

 

We also have four classic VW's imported from america which are going to get a full St Leger Conversion. With another two on their way, were hoping for them to be delivered before Christmas.

Check out our Projects and Gallery page for updates on these vans and for previous classic conversions we have done.

 

Check out our Facebook page for the latest updates at St Leger Conversions

 

 

Read More

Testimonial

Definately be back to add more upgrades to my van.

Read More

ProPex HS2000 Blown Air Space Heater

The HS2000 like the larger HS2800 heaters are automatic thermostatically controlled blown air heating systems fuelled by propane or butane gas. Heatsource is designed for a variety of automotive and marine applications as a source of heat totally independent of the engine.

There is also a dual-fuelled gas and electric powered heater, the HS2000E available.

Price: 445.00
Availability: IN STOCK
ADD TO CART

Specification

Applications

Propex Heatsource blown air systems are used in many applications throughout the world, these include Motorhomes, Caravans, Boats, Cranes, Horseboxes, Mobile Workshops etc. Both 12 and 24 volt versions are available.

Control

The HS20000 is supplied as standard with a solid state electronic thermostat which automatically switches the unit on and off to maintain the desired temperature. When the room temperature drops below the selected level, the Heatsource will automatically ignite and run until the cabin reaches the selected temperature. The thermostat is an easy to fit surface mount design and integrates with the new electronics fitted to the HS2000 and HS2800 heaters. An easy to operate panel mounted digital timer/thermostat specifically designed for Heatsource, is also available. Unlike some heaters, there is minimal electric current consumption during ignition so cycling the Heatsource on and off does not have the effect of additional battery drain.

 

Efficiency

With forced air combustion and the Propex two stage stainless steel heat-exchanger, the HS2000 is a clean and highly efficient way to heat your vehicle or boat. Air for combustion is taken from outside and passed into the combustion chamber having been mixed with gas during three aeration stages, it is ignited automatically and heats up the large surface area of the heat-exchanger. The Heatsource units are totally room sealed and exhaust all products of combustion externally through the neat 22mm i.d. stainless steels flue pipe. To add to the efficiency, cabin air is normally re-circulated in preference to using cold air from outside. The HS series heaters are also very efficient on electrical current consumption, the high quality motor/fan combination and innovative current reducing electronics, both of which have been improved in the latest versions, means that even the larger HS2800 draws less than 2 amps during normal operation.

 

Quiet Operation

Propex heaters are designed to be quiet in operation without compromising air throughput and heat output. There will always be some air noise from a system that produces a healthy throughput of air, however, by using high quality balanced fans and smooth enclosed motors with ball race bearings, noise is kept to a minimum. Noise is also unaffected by high voltage, a common occurrence with battery charges, solar panels etc permanently wired. The micro-processor electronics regulates the motor voltage so that the fan speed does not alter from 10 to 15 volts.

 

Safety

Heatsource blown air heaters conform to the latest European standards for both the appliance and the electronics and during the rigorous testing the focus is very much on safety. The heaters also have to comply with an enhanced version of the Electro Mechanical Compatibility Directive to ensure they do not interfere with other electronics and that they are immune from interference by other electronics.

The intelligent electronics are continuously monitoring the operation of the heater to make sure everything is operating correctly and safely. This includes monitoring of the flame, case temperature, combustion airflow, gas solenoid valve and voltage. Should any of these stray outside of the predetermined levels, the heater will be switched off and the red light on the thermostat will indicate a fault by flashing a certain number of times.

 

Need any more info

Call us if you have a question, to get a quote help and advice

Tel: 01242 300279

Mob:

Email:

Sales parts

+ Read More

OUR GALLERY

+ Read More